Flash Select Setting For Pbx - Sharp FO-3150 Operation Manual

PBX and Display Settings

Flash Select Setting for PBX

Note: This setting is normally only used in Germany. In other countries, you
can try changing the setting if you encounter difficulty with the default setting.
If your fax machine is connected to a PBX and the PBX uses the "Flash"
method to connect to an outside line, you must select the appropriate Flash
Select setting depending on whether your PBX line is a normal telephone line
or an ISDN line (or other high-speed line).
FUNCTION
1
Press
2
Press
3
Press
4
Select 1
line is a normal telephone line.
Select
2
line is an ISDN line (or other high-
speed line).
STOP
5
Press
30
once and 3 times.
once and 9 times.
once.
(SHORT TIME) if your PBX
(LONG TIME) if your PBX
to return to the date and time display.
Display:
OPTION SETTING
FLASH SELECT
1: SHORT TIME
The display briefly shows
your selection, then:
FAX SIGNAL RX