Reception Ratio - Sharp UX-BD80 Operation Manual

1
On the fax machine, press
and twice.
2
Press once and
3
Press once.
4
Press to select YES or
select NO.
5
Press to return to the date and time display.

Reception Ratio

The machine has been set at the factory to automatically reduce the size of
received documents to fit the size of the printing paper. This ensures that data
on the edges of the document are not cut off. If desired, you can turn this
function off and have received documents printed at full size.
♦
If a document is too long to fit on the printing paper, the remainder will be
printed on a second page. In this case, the cut-off point may occur in the
middle of a line.
♦
Automatic reduction may not be possible if the received document is too
large, contains too many fine graphics or images, or is sent at high
resolution. In this case, the remainder of the document will be printed on a
second page.
1
Press once and
Optional Reception Settings
Display:
once
twice.
to
Display:
3 times.
DECT SETTING
REMOTE FAX RX
REMOTE FAX RX
1=YES, 2=NO
The display briefly shows
your selection, then:
SYSTEM PIN
PRINT SET-UP
131