To Cancel An Operation - Sharp UX-485 Operation Manual

Timer Operations
8
Adjust the resolution and/or
contrast if desired (skip to the next
step if you don't want to change
settings).
RESOLUTION
9
Press the START/MEMORY key
and then the STOP key. If this is a
transmission operation, load the
document in the feeder sometime
before the specified time of
transmission.
START/MEMORY
82
STOP

To cancel an operation

If you need to cancel an operation
after it has been set, follow the steps
below.
1
Press these keys:
FUNCTION
TIMER MODE
2
Press # to cancel a transmission
operation, or * to cancel a polling
operation.
or
3
Press 2 to select CLEAR.
4
Press the START/MEMORY key
and then the STOP key.
START/MEMORY
1
2
STOP