Table of Contents
Advertisement
2
Press 1 to turn Toll Saver on, or 2
to turn it off.
1
or
3
Press the STOP key.
STOP
2
Remote Operations
Retrieving your messages
Note: You can also access the UX-
485 for remote operation when the
reception mode is set to FAX. In this
case, call the UX-485, press the "#"
key immediately after it answers, and
then continue from Step 2 below.
1
Call the UX-485 from a touch-tone
telephone. When your outgoing
message begins, press the "#" key
on the telephone.
You will hear a short beep, and the
outgoing message will stop.
2
Enter your remote code number
and then # by pressing the keys on
the telephone.
2
2
You will hear a series of beeps
equal to the number of messages
recorded, or one long beep if four
or more messages have been
received. The machine will then
play back the messages, beeping
once at the end of each message.
When all messages have been
played back, you will hear a long
beep.
If no messages have been
received, you will hear a short
beep. You can either hang up, or
perform any of the operations
described in the following section
Other remote operations.
2
(Example)
37
Advertisement
Table of Contents
