Table of Contents
Advertisement
Recording a new transfer
message
1
Press "9", "3", and "#" on the
telephone.
9
3
2
When you hear a short beep,
speak into the telephone to record
the new message.
The time for the transfer message
is fixed at 15 seconds. After 15
seconds (or earlier if the machine
detects silence after you finish
speaking), you will hear a beep,
and the new message will be
played back automatically.
Recording a "Memo"
You can record a "memo" for yourself
or other users of the UX-485. The
memo will be played back when
incoming messages are listened to.
1
Press "*" and "#" on the
telephone.
2
When you hear a short beep,
speak into the telephone to record
the memo.
Remote Operations
3
When you are finished, press "0"
and "#".
0
If the UX-485 detects a certain
period of silence, it will stop
recording automatically.
OGM only mode
To turn on OGM only mode, press
"1", "1", and "#". (Your outgoing
message will play, but callers will not
be able to record a message. Faxes
sent by automatic dialling will be
received.)
1
1
To turn off OGM only mode, press
"1", "2", and "#".
1
2
41
Advertisement
Table of Contents
