Loading The Document - Sharp UX-485 Operation Manual

Loading the Document

Up to 10 pages can be placed in the feeder at one time. The pages will
automatically feed into the machine starting from the bottom page.
If you need to send or copy more than 10 pages, place the additional pages gently
and carefully in the feeder just before the last page is scanned. Do not try to force
them in, as this may cause double-feeding or jamming.
If your document consists of several large or thick pages which must be loaded
one at a time, insert each page into the feeder as the previous page is being
scanned. Insert gently to prevent double-feeding.
1
Adjust the document guides to the
width of your document.
2
Place the document face down and
push it gently into the document
feeder. The top edge of the
document should enter the
machine first.
The feeder will draw the leading
edge of the document into the
machine. The display will show:
READY TO SEND
Loading the Document
3
Adjust the resolution and/or
contrast setting (if desired) as
explained in the section Resolution
and Contrast, then dial the
receiving machine as explained in
Sending a Fax by Normal Dialling.
RESOLUTION
43