Important Safety Information - Sharp UX-108 Operation Manual

Important safety information

•
Do not disassemble this machine or attempt any procedures not described in this
manual. Refer all servicing to qualified service personnel.
•
This machine must only be connected to a 120 V, 60 Hz, grounded (3-prong)
outlet. Connecting it to any other kind of outlet will damage the machine and
invalidate the warranty.
•
Do not install or use the machine near water, or when you are wet. Take care
not to spill any liquids on the machine.
•
Unplug the machine from the power outlet and telephone jack and consult a
qualified service representative if any of the following situations occur:
- Liquid has been spilled into the machine or the machine has been exposed
to rain or water.
- The machine produces odors, smoke, or unusual noises.
- The power cord is frayed or damaged.
- The machine has been dropped or the housing damaged.
•
Do not allow anything to rest on the power cord, and do not install the machine
where people may walk on the power cord.
•
Never insert objects of any kind into slots or openings on the machine. This could
create a risk of fire or electric shock. If an object falls into the machine that you
cannot remove, unplug the machine and consult a qualified service repre-
sentative.
•
Do not place this machine on an unstable cart, stand or table. The machine could
be seriously damaged if it falls.
•
Never install telephone wiring during a lightning storm.
•
Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
•
Never touch bare telephone wires or terminals unless the telephone line has been
disconnected at the network interface.
•
Use caution when installing or modifying telephone lines.