Using The Redial Key - Sharp UX-108 Operation Manual

4
Wait for the connection. Depending on
the setting of the receiving machine, you
will either hear a facsimile reception tone
or the other person will answer.
• • • • If the other party answers, ask them to
press their Start key (if you pressed the
SPEAKER key, pick up the handset to
speak with them). This causes the
receiving machine to issue a reception
tone.
5
When you hear the reception tone, press
the START key. Replace the handset (or
press the SPEAKER key to turn off the
speaker).
• • • • When transmission is completed, the
fax will beep once.

Using the REDIAL key

You can press the REDIAL key to redial the last number dialed. To send a
document, proceed from Step 4 of Normal Dialing. Note that the speaker will
be automatically activated when you press the REDIAL key.
Facsimile reception tone: This is a pronounced, high-pitched tone that the
receiving machine sends to the transmitting machine to indicate that it is
ready to receive.
Sending a Fax by Normal Dialing
Beep
START
29