Sharp UX-108 Operation Manual page 57

4
Press 1 to select SET. (To clear a
previously programmed area code, press
2 and go to Step 7.)
The display will show:
5
Enter the three digits of your area code.
6
Press the START key to store your area
code.
The display will show:
7
Press the STOP key to return to the date
and time display.
How Caller ID operates
When you receive a call, the name and phone number of the caller will
alternately appear in the display, beginning just before the second ring. The
information will continue to be displayed until you pick up the handset, or
until the fax answers automatically if it is in FAX mode.
Note: Some caller ID services may not provide the name of the caller. In
this case, only the phone number will appear.
Display example:
DOE JOHN
Caller's name
CLEAR
SET
1
2
or
ENTER AREA CODE
2 0 5
START
FINE PRIORITY
STOP
444-555-6666
Caller's number
Caller ID
(Example)
49