Normal Dialing - Sharp UX-108 Operation Manual

SETTING THE
DATE AND TIME
Press:
FUNCTION
3
Display shows:
DATE & TIME SET
START
Press the key:
Enter two digits for the Month (01 through 12).
Enter two digits for the Day (01 through 31).
Enter four digits for the Year (Ex: 1998).
Enter two digits for the Hour (01 through 12).
Enter two digits for the Minute (00 through 59).
Press the * key for A.M. or the
When finished, press:
STORING AND CLEARING
NUMBERS FOR AUTO DIALING
1. Press:
FUNCTION
3
Display shows:
FAX/TEL # MODE
2. Press
1 to store a number or
ber.
3. Enter a 2-digit Speed Dial number (from 01 to
10 for Rapid Key Dialing, or 11 to 30 for Speed
Dialing). (If you are clearing a number, go to
Step 7.)
4. Enter the full telephone/fax number.
5. Press:
START
6. Enter the name of the location by pressing num-
ber keys (max. of 20 characters). (Refer to the
ENTERING YOUR NAME
letter entry table in
AND NUMBER .)
START
7. Press:
88
START
# key for P.M.
START
STOP
2 to clear a num-
STOP
SENDING DOCUMENTS
Place your document
(up to 10 pages) face
down in the document
feeder.

Normal Dialing

1. Lift the handset or press
2. Dial the fax number.
3. Wait for the reception tone (if a person answers,
ask them to press their Start key).
START
4. Press:
Rapid Key Dialing
Press the appropriate Rapid Key. Transmission
will begin automatically.
Speed Dialing
1. Press: SPEED DIAL
2. Enter 2-digit Speed Dial number.
3. Press:
START
RECEIVING DOCUMENTS
RECEPTION
Press:
MODE
FAX
mode: The fax automatically answers on four
rings and receives the incoming document.
TEL
mode:
RECEIVING
A.M. mode: Select this mode when an answering
machine is connected to the fax and the answer-
ing machine is turned on.
SPEAKER
TEL FAX
FEB 1 10:30
A.M.
TEL FAX
FEB 1 10:30
A.M.
TEL FAX
FEB 1 10:30
A.M.
Fax
START
tone