Power On And Off; Power Save Modes - Sharp AR-280 Operation Manual

POWER ON AND OFF

Power on
Power off

Power save modes

The copier has two power save modes to reduce overall power
consumption and thereby reduce the cost of operation and to conserve
natural resources to help reduce environmental pollution. The two
power save modes are preheat mode and auto power shut-off mode.
KEY OPERATOR
The preheat activation time and the auto power shut-off time have been
preset at the factory to 15 min. for preheat mode and 60 min. for auto
power shut-off mode. These times can be changed as described in the key
operator's guide section. It is suggested that you set appropriate times
according to the actual usage of the copier.
The power switch is located on the left side of the copier. When the
power switch is turned to the "ON" position, the message "WARMING
UP. PLEASE WAIT." will appear in the message display. Warming
up takes about 65 seconds. Once the copier is ready, the message
display will change to "READY TO COPY.", and the START (
indicator will light up, indicating that copying is possible.
If the copier has been programmed in the auditing mode, the
message "ENTER YOUR ACCOUNT NUMBER. -----" will appear
after warming up. Once a valid account number has been entered,
copying will become possible.
) key
1-5