Transparency Film With Insert Sheets - Sharp AR-280 Operation Manual

TRANSPARENCY FILM WITH INSERT SHEETS

OK
OK
CANCEL
OK
PRINT ON THE INSERT
OK
SHEETS?
THE INSERT
YES
NO
ORIGINAL
A4
1. A4
2. A3
AUTO A4 100%
PAPER SELECT COPY RATIO
INTERRUPT CLEAR ALL
CA
START
CLEAR
C
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
AUTO AUTO A4
EXPOSURE PAPER SELECT
3-16
4 Indicate whether the insert sheets are copied on or not.
Select "YES" or "NO" on the touch panel.
5 Press the upper "OK" key.
Load transparency film into the bypass tray.
6
7 Ensure that the desired tray is selected for insert sheets.
A4
The copy paper for insert sheets must be the same size as the
transparency film.
8 Make all other selections and press the START (
If the document feeder is used, scanning of originals and
copying will start.
If the document glass is used in the SORT mode, proceed to the
next step.
9 Replace the finished original with the next original after
the START (
the START (
have been scanned. Then, press the "READ-END" key
on the touch panel.
Copying will start at this time.
READ-END
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
100%
When copying is completed, remove remaining transparency
COPY RATIO
film.
To cancel the TRANSPARENCY INSERTS function, select the
TRANSPARENCY INSERTS function again and press the
"CANCEL" key.
) key indicator lights up, and then press
) key. Repeat this step until all originals
) key.