Margin Shift - Sharp AR-280 Operation Manual

MARGIN SHIFT

Original
Expanded margin
(Initial setting:
copy image shifted to the right)
Margin is expanded here.
Margin is expanded
here.
3-4
The MARGIN SHIFT feature, in its initial setting, automatically shifts the
Copy
text or image to the right both on one-sided copies and on the front side of
two-sided copies. The text or image is shifted to the left on the reverse side
of two-sided copies. Shift direction can be changed to left, upper or lower
in the manner described below in step 4.
The standard shift amount is 10 mm (1/2"), but can be changed from
0 mm to 20 mm in 1 mm increments (from 0" to 1" in 1/8" increments).
KEY OPERATOR
to 20 mm in 1 mm increments (from 0" to 1" in 1/8" increments). See page
8-16.
NOTE:
The front side and reverse side are referred to as "SIDE 1" and "SIDE 2"
respectively on the touch panel.
Place the original in the document feeder tray or on the
1
document glass.
Press the SPECIAL MODES key.
2
The SPECIAL MODES screen will appear.
READY TO CO
The initial shift setting can be changed from 0 mm
READY TO COPY.
SPECIAL MODES

MARGIN SHIFT

ERASE
MULTI SHOT COVERS
PAMPHLET COPY IMAGE EDIT
AUTO AUTO A4
EXPOSURE PAPER SELECT
OK
DUAL PAGE
COPY
TRANSPARENCY
INSERTS
TEXT STAMP
100%
COPY RATIO