Power On And Off - Sharp SD-2060 Operation Manual

POWER ON AND OFF

The power switch is located on the right side of the copier. When the
power switch is turned to the "ON" position, the message "WARMING
UP, PLEASE WAIT." will appear in the message display. Warming
up takes about 5 minutes. Once the copier is ready, the message
display will change to "READY TO COPY.", and the START key
indicator will light up, indicating that copying is possible.
If the copier has been programmed in the audit account mode, the
message "ENTER YOUR ACCOUNT NUMBER. -----" will appear
after warming up. Once a valid account number has been entered,
the message will change to "READY TO COPY." and the START key
indicator will light up.
8
Downloaded from: http://www.usersmanualguide.com/
I I
Power up timer
The power up timer mode will automatically turn off the power to the
copier after a programmed length of time has elapsed from the time
the power was first turned on.
If the power up timer mode is set, the power will turn off even with the
power switch in the "ON" position. To turn the power back on, turn
the power switch to the "OFF" position, then again to the "ON" posi-
tion.
KEY OPERATOR See page 14 of the KEY OPERATOR'S GUIDE for
setting the power up timer mode.
I
I