Sharp AR-280 Operation Manual page 37

TO COPY.
X
%
Y
%
100%
%
READY TO COPY.
X 50
70%
Y 100
64%
ZOOM
50% 100%
XY ZOOM CANCEL
AUTO AUTO A4
EXPOSURE PAPER SELECT
READY TO COPY.
1. A4
2. A3
AUTO AUTO 8/ 11 1
2
EXPOSURE PAPER SELECT
1 2 3
INT
4 5
6
7
8 9
AUDIT CLEAR
PROGRAM
0 P
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
AUTO A4
EXPOSURE PAPER SELECT
5 Press the
The copy ratio in the vertical (Y) direction will be highlighted.
50
%
100
%
ZOOM
6 Use the reduction, enlargement, and ZOOM (
keys to change the copy ratio in the vertical (Y) direction.
%
OK
%
To change the copy ratio in the horizontal direction again, press
the
141%
The message "IMAGE IS LARGER THAN THE COPY PAPER."
200%
may appear, indicating that the selected copy ratio is too large
for the copy paper size. However, if you press the START (
400%
key, a copy will be made.
Press the "OK" key.
7
8 Press the "PAPER SELECT" key and select the paper
tray with the desired paper size.
If the AUTO PAPER SELECT mode is on, the appropriate copy
paper size will have been automatically selected based on the
original size and selected copy ratios.
X—50% Y—70%
COPY RATIO
Enter the desired number of copies.
9
CLEAR ALL
CA
Press the START (
10
If the document feeder is used, scanning of originals and
START
copying will start.
If the document glass is used in the SORT mode, proceed to the
next step.
Replace the finished original with the next original after
11
the START (
the START (
READ-END
have been scanned. Then, press the "READ-END" key
on the touch panel.
AUTO IMAGE
Copying will start at this time.
X—50% Y—70%
COPY RATIO
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
To cancel this function, press the "CANCEL" key or the "XY
ZOOM" key again as in step 3.
key.
Y
key.
X
) key.
) key indicator lights up, and then press
) key. Repeat this step until all originals
XY ZOOM
, )
)
3-3