Margin Shift - Sharp AR-250 Operation Manual

MARGIN SHIFT

Original
Expanded margin
(Initial setting:
copy image shifted to the right)
Margin is expanded here.
Margin is expanded
here.
3-4
The MARGIN SHIFT feature, in its initial setting, automatically shifts the text
Copy
or image to the right both on one-sided copies and on the front side of two-
sided copies. The text or image is shifted to the left on the reverse side of
two-sided copies. Shift direction can be changed to left, upper or lower in
the manner described below in step 4.
The standard shift amount is 10 mm (1/2"), but can be changed from
0 mm to 20 mm in 1 mm increments (from 0" to 1" in 1/8" increments).
KEY OPERATOR
to 20 mm in 1 mm increments (from 0" to 1" in 1/8" increments). See page
8-16.
NOTE:
The front side and reverse side are referred to as "SIDE 1" and "SIDE 2"
respectively on the touch panel.
Place the original in the optional document feeder tray
1
or on the document glass.
Press the SPECIAL MODES key.
2
The SPECIAL MODES screen will appear.
READY TO CO
The initial shift setting can be changed from 0 mm
READY TO COPY.
SPECIAL MODES
MARGIN SHIFT ERASE
MULTI SHOT COVERS
PAMPHLET COPY IMAGE EDIT
AUTO AUTO A4
EXPOSURE PAPER SELECT
OK
DUAL PAGE
COPY
TRANSPARENCY
INSERTS
TEXT STAMP
100%
COPY RATIO