Creating Margins When Copying (Margin Shift) - Sharp AL-2061 Operation Manual

CREATING MARGINS WHEN COPYING
The margin shift function is used to automatically shift the text or image or the copy
paper approximately 10mm.
As shown below, LONG EDGE or SHORT EDGE can be selected.
AB
RSPF
B A
Document glass
Original
• This feature cannot be used with the 2 IN 1 feature.
• The margin width can be changed with "MARGIN WIDTH" in the user
programs. (p.137)
• Note that a margin is created by shifting the image, and thus if the
image is shifted too far, the edge of the image may be cut off.
1
Place the original(s).
2
Press the [E-SORT/SP.FUN (
until "MARGIN SHIFT" appears and then
press the [OK] key.
SHORT EDGE
AB
Margin
Copy
)] key
(Margin shift)
LONG EDGE
AB
Margin
SPECIAL FUNCTION
MARGIN SHIFT
37