Sharp AR-250 Operation Manual page 152

KEY OPERATOR PROGRAMS
Category
Other Programs
8-6
Program Name Function
Disabling of Prevents damage to the stapler while awaiting
Stapler repair service.
(The stapler is included in the optional finisher
(AR-FN1N, AR-FN2).)
Disabling of Prevents the selection of COVERS mode.
Covers Mode (The COVERS mode can be used when an optional
document feeder is installed.)
Disabling of Provides or prevents access to key operator programs 8-25
PC/Modem Access through a PC/modem without key operator code entry.
Disabling of Second Disables output of copies to the second tray in
Tray Output in interrupt copying.
Interrupt
Disabling of Auto Disables the auto power shut-off mode.
Power Shut-off Mode
Disabling of Beep Enables or disables sounding of beep when keys
When Keys Touched are touched.
Disabling of Bypass- Disables the Bypass Tray when the offset is selected
Tray When Offset for the optional finisher (AR-FN2 only).
Tray Selected
Total Count Recalls the total counts, including counts of the
copier, document feeder, duplex module, and stapler.
Program List Sequentially prints available key operator programs.
Printout
Page No.
8-25
8-25
8-26
8-26
8-26
8-27
8-27
8-27