Finisher (Ar-Fn2); Part Names; Specifications - Sharp AR-250 Operation Manual

FINISHER (AR-FN2)

The copier has two different finisher modes: one sorts copies into sets
matching the sequence of the originals and the second groups copies by
original. When the optional finisher (AR-FN2) is installed, the copier can
automatically staple the sorted copies. Each collated set of copies or
group of copies can be stacked offset from the previous set.

PART NAMES

Top tray
Offset tray
CAUTION
Do not put pressure on the finisher or subject it to undue force.

Specifications

Top cover
Stapler cover
Tray capacity
Paper size
Paper weight
Offset
Paper size
for stapling
Stapling capacity 30 sheets (80 g/m
Power supply
Weight
Dimensions
Specifications are subject to change for improvement without notice.
Paper feed area cover
Staple cartridge
Top tray: 250 sheets
Offset tray: 750 sheets
Top tray: A3 to A6R
(5-1/2" x 8-1/2" to 11" x 17", 12" x 18")
Offset tray: A4 (8-1/2" x 11")
Top tray: 52 to 128 g/m
Offset tray: 56 to 128 g/m
For paper weighing more than 105 g/m
A4 (8-1/2" x 11") is the maximum size.
Min. 15 mm for A4 (61/64 inch for 8-1/2" x 11")
A4 (8-1/2" x 11")
2 (21 lbs.))
Drawn from the copier
Approx. 22 kg (49 lbs.)
457 mm (W) x 518 mm (D) x 820 mm (H)
(18"(W) x 20-13/32"(D) x 32-19/64"(H))
2 (14 lbs. to 34 lbs.)
2
(15 lbs. to 34 lbs.)
2 (28 lbs.),
7-19