Advertisement
Manual URC 4689 UK Apr05.fm Seite 7 Montag, 11. April 2005 12:00 12
Universal functions
The universal functions allow you to perform certain functions on another type
of device than the selected one.
Example: The last selected appliance is a VCR, but you would like to control the
volume of your TV.
Proceed as follows:
1. Press the TV mode.
2. Keep the SET key pressed for approx. 3 seconds until the LED indicator
lights continuously.
3. Release the SET key.
4. Keep the MUTE key pressed for approx. 8 seconds until the MODE key
flashes a second time.
SHIFT function
Some keys of the universal remote control can be allocated twice. To use these
functions, briefly press the "SET" key (MODE key lights up) and then the key
controlling this second function.
Troubleshooting
The remote control does not work
• Check whether your devices are correctly connected and switched on.
• Check whether the batteries of the remote control are correctly inserted and
whether the polarity + / - matches with the marks.
• If the batteries are too low, replace them by new ones.
Several device codes are listed under the brand of my device. How can I
determine the right device code?
• To determine the right device code for your device, try the codes successively
until most of the functions of the device are working properly.
The devices only respond to a few instructions of the remote control.
• Test further codes until the devices respond appropriately to the commands.
• If in some exceptional cases neither a manual code entry nor the automatic
code search are successful, your device may be incompatible with your
universal remote control.
7
Hide quick links:
Advertisement
