Fax/Data Mode Using A Pc - Siemens S46 User Manual

Fax/Data Mode Using a PC

86
§Menu§ Setup
Connectivity
Fax/data mod.
Faxes and data may be transmitted
and received when the phone is con-
nected to a PC. In order to do this,
the phone must be connected via in-
frared or a data cable to a PC installed
with data/fax communication soft-
ware (available from a third party
source).
Fax and data services must be en-
abled by the service provider. Differ-
ent networks support different types
of fax/data reception. Contact your
service provider for details.
Fax/data mode
Your service provider must provide
you with a number for your telephone
and a separate fax/data number.
Sending
Start your PC communication soft-
ware program and enter the required
destination phone number.
Receiving
When a fax or data is being received,
the call is signaled by a special ring
and the type of call (either fax or data)
will be displayed.
Start the communication software
program in your PC to receive the fax/
data
Voice/fax
Sending
§Menu§
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
While the connection is being
set up, the following soft key is briefly
available:
§Voice/fx§
Z
Receiving
(Only if a special fax or data number
is not available).
Start the required communication
program in your PC and switch on the
function at the phone during the call
(the PC accepts the connection).
§Menu§
End transmission
End transmission in the PC software
and/or press
©
Setup
Connectivity
Fax/data mode
Send vce/fax
Send vce/fax
Switch to
mode; you may now
send a fax.
Setup Connectivity
Fax/data mode
Voice/fax rec
-
.