Multi Party; Call Menu - Siemens M56 User Manual

M56 Barracuda long, am english, A31008-H6350-A40-1-4A19 (28. July 2003,
28

Multi Party

Call up to 5 parties one by one and
link them together in a conference
call. Some of the functions described
may not be supported by your ser-
vice provider or may have to be
enabled specially. You have estab-
lished a connection:
y menu§ Open menu and select
Hold. The current call is
put on hold.
Now dial a new number.
When the new connec-
tion is established ...
... open menu and select
y menu§
Multi Party. The held call is
joined.
Repeat procedure until all partici-
pants are linked together (up to
5 participants).
End
All calls in the conference
finish simultaneously
when the End key is
pressed.
Calling

Call menu

The following functions are only
available during a call:
y menu§
Hold
Mute
Speaker-
phone
Volume
Multi Party
Durat/
charges
Send DTMF
Call trans-
fer
Main menu
Call status
Open menu.
(p. 26)
Switch microphone on/off. If
switched off, the person on
the other end of the line
cannot hear you (muting).
Also: hold down.
(p. 26)
Adjust handset volume.
(See above)
Display call duration and if
set (p. 45) costs accruing
during the call.
(p. 115)
The original call is con-
nected to the second one.
For you, both calls are now
ended.
Access to main menu.
List all held and active calls
(e.g. conference call partici-
pants).