Closed User Group - Siemens ST60 Operating Instructions Manual

ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
C
sed user MCall register
MClosed user group
up
Select function.
M
Depending on service provider,
you can create groups with this
service. These can have access to
internal (company) information, for
example, or special tariffs apply.
Please check with your service pro-
vider for details.

Closed user group

Activate/deactivate function.
user group
normal phone use (phone code,
p. 13).
Select group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are
obtained from your service provider.
Outg. access
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
Closed user group
must be deactivated for
Pref. group
If activated, calls may only be made
within this standard user group
(depending on the network configu-
L
ration).
Closed
63