User Group - Siemens CL50 User Manual

68
When roaming
You do not receive calls when you
are outside your home network. This
means that no charges are incurred
for incoming calls.
Status check
The following information can be dis-
played after a status check:
^
Barring set.
å
Barring not set.
?
Status unknown
(e.g. new SIM card).
Clear all
All barrings are cleared.

User group

§Menu§ Setup
User group
If offered by the service provider,
this service enables groups to be
formed. These have access for ex-
ample to internal (company) informa-
tion or special tariffs apply to them.
Check with your service provider for
details.
User group
Activate or deactivate the function.
User group must be deactivated for
normal phone use (phone code,
p. 65).
Setup
Select group
You may select or add groups other
than the preferred groups (see be-
low). The service provider supplies
you with code numbers for the
groups.
Outg. access
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
Pref. Group
If activated, only calls within this
standard user group can be made
(depending on the network configu-
~
ration).