Network - Siemens ST60 Operating Instructions Manual

ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
This SIM only
(Phone-code protected)
The phone can be connected to a
SIM card when the phone code is
entered. Unless the phone code is
known the phone will not operate
with a different SIM card.
If the phone is to be used with a dif-
ferent SIM card, enter the phone
code when requested.

Network

C
MSettingsMNetwork
MSelect function.
Line
To use this function, two separate
phone numbers must be registered
on the phone.
Select line
Select the currently used phone
number.
Display the active line:
Block line
(Phone-code protected)
You may limit usage to one phone
number.
Settings
Configuration
L
Network info
The list of GSM networks currently
available is displayed.
Choose network
Network search is restarted. This is
useful if you are not on your home
network or want to register on a dif-
ferent network. The network list is
rebuilt when
Auto network
If
Auto network
network is dialled in the order of
your
Pref. network
ent network can be selected manu-
ally from the list of the available GSM
L
networks.
Pref. network
Enter your preferred service provid-
ers here for when you leave your
home network (e.g. if there are dif-
ferences in price).
Additional information
If the signal strength of the preferred net-
work is inadequate when you switch on the
phone, the phone may register in a different
network. This can change when the tele-
phone is next switched on or if another net-
work is selected manually.
Auto network is set.
is activated, the next
. Otherwise a differ-
57