Three-Party Conference - Gigaset A16 User Manual

Expandable cordless phone system

Hide thumbs Also See for Gigaset A16:

Table of Contents

Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03

The paged handset will ring, you can press the INT key to talk to

the paging handset. During intercom, press the End key on the

paging handset and then the call will be transferred to the paged

handset.

When a call comes in, press the End key on the paging handset to

transfer the call. Then the paged handset will ring, and you press

the Talk/Flash key answer the incoming call.

Note: The ring for transferring an external call will sound for 30

seconds. After 30 seconds, if the handset does not answer, the ring

will stop. Then the paging handset will ring. If you do not press

any key, the call will be ended in 30 seconds.

Three-party conference

This function is applicable for 2 registered handsets to talk to an

external caller.

When one handset answers the call, press the INT key, and you

will see "Line on Hold Extension?" on the display. Then press the

handset number 1, 2, 3, or 4 (relevant handset number). And the

handset will page another handset.

Then the paged handset will ring; you can press the INT key to

talk to the paging handset. (If the paged handset is not willing to

answer the incoming call, simply press the End key to end the

intercom.)

During intercom, press the Talk/Flash key on the paging handset

to cancel external line holding and enter Three-Party Conference

mode. "Conference" will appear on the display of both handsets.

Note: The paging ring will last for 2 minutes. After 2 minutes, if

the other handset does not answer, the ring will stop. "No

Answer" will be displayed on the display of the paging handset

and this handset will resume talking to the caller.

When the first handset is talking to an external caller, users can

press the Talk key on the other handsets to enter the conference.

Table of Contents