Table of Contents
Advertisement
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03
Other settings
Pulse/Tone Dialing
At the rare of the base is the Pulse/Tone switch, so you can select
either Tone or Pulse dialing mode.
Ringer On/Off
Set ringer Off: Keep pressing the "Tone key" until you see "Ringer
Off, no interruption" on the LCD and hear a confirmation beep.
Or
Set ringer On: Keep pressing the "Tone key" until you see "Ringer
On" on the LCD and hear a confirmation beep.
Low Battery Indicator
When the handset batteries are low and need charging, its internal
program will reduce functions to save power. "Low Battery" will
appear on the LCD if you are not using the handset. But if you are
using the handset, you will not only see the message on the LCD, but
also hear beeps. When this happens, you should end the call as soon
as possible and put it back to its base to charge.
10
Advertisement
Table of Contents
