Hold A Talk; Temporary Switch To Tone Dialing; Display Incoming Numbers; Search Incoming Numbers - Gigaset A16 User Manual

Expandable cordless phone system

Hide thumbs Also See for Gigaset A16:

Table of Contents

Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03

Press the Hold key to pause talking without ending the call and press

the same key again to resume the call.

Temporary Switching to Tone Dialing

This function is designed for pulse dial users. This function can

change the pulse dialing to tone dialing temporarily to access the

service systems that requires tone dialing. For example, after

accessing banks or credit card companies, if the user wants to operate

in their internal system, then he/she must change the pulse dialing to

tone dialing temporarily.

When the call is put through, press Tone key, then the numbers dialed

later are all in Tone mode.

Note: The change of dial modes is only valid for this call. When the

call ends, it will automatically return to the original dialing mode.

Displaying Incoming Numbers (Calling Line

Identification)

This phone can display incoming call numbers from FSK or DTMF

system and save up to 40 numbers (15 digits or letters), and each

number is recorded with its incoming time (only applicable for FSK

system.).

Searching Incoming Numbers

Press the (CID) key and you will see the number of new calls you

have received on the display.

Press - key to display the latest incoming call number, press the same

key again to display the next incoming call number.

Press "+" key to display the previous incoming call number.

Press the End key to exit.

Note: If certain numbers are repeated, there will be indicators

"Repeat" with the numbers.

Table of Contents