Suggestive Information; How To Deal With Common Failures - Gigaset A16 User Manual

Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03

Suggestive information

Meaning of the following information
INCOMPLETE DATA
HANDSET NAME
ENTER NAME
LINE IN USE
ENTER TEL NUMBER
DELETE ALL?
DELETE CALL ID?
DELETE?
END OF LIST
NEW
UNKNOWN CALLER
DEREGISTERING
HANDSETS NEEDS REGISTRATION
SEARCHING
OUT OF RANGE
PAGING OR PAGING FROM
BLOCKED NUMBER
NO CALLS
NO DATA
NEW CALL XX
LOW BATTERY
LONG DISTANCE

How to deal with common failures

Caller ID Service
Question
No display
Display error
No incoming call information
The incoming call signal is interfered when
being transmitted or great noise exists in the
wire.
Remind entering the user name of registered
handset.
Entering the name into the directory for
memory.
Telephone line is in use
Entering the phone number into the directory
for memory.
Deleting all incoming call records or not?
Deleting the incoming call record displayed on
the screen or not?
Deleting a record from directory or not?
End of incoming call records list
Displaying new incoming call records which
has not been browsed
The area which the caller located has no this
kind of service or information cannot be
transmitted.
Handset in the process of deregistering.
You must register the handset before using.
Handset is searching for the base.
Handset is too far away from the base and it
should move close into the effective range.
The INT key on the base has been pressed or
the INT key on the other handset has been
pressed.
The information of incoming call has been
hidden.
No incoming call records.
Receiving no information of incoming call,
didn't register the calling line identification
service or the service failing
XX means the number of new incoming call
records which have not been browsed.
The handset has to be charged.
The new incoming call is a long distance call.
Solution
Replace the batteries and be sure the
batteries are inserted correctly.
Have you applied the Caller ID Service
from your phone service company?
If the base receives any ineffective
information, it will display error.
You must apply for the Caller ID Service
from your local phone service company.
19