Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03 Table of Contents Preparing to use your phone..................4 The pack contains: ....................4 Installation prior to use ...................4 Product Layout ......................5 Functions of handset ....................5 Handset LCD ......................6 Functions of the base ....................6 Base LCD........................7 Base connected to more than one handset ..............8 Telephone Setup ......................9 Setting Time ......................9...
Page 3
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03 Deleting An Incoming Number..............16 Deleting All Incoming Numbers..............16 Dialing Back An Incoming Number ..............16 Storing, Browsing and Deleting Phone Numbers ..........17 Storing Phone Numbers .................17 Inserting Dialing Pause ..................17 Modifying Stored Phone Numbers ..............17 Storing Outgoing (redial) Numbers ...............17 Browsing the Stored Numbers ...............18 Deleting Stored Numbers................18...
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03 Preparing to use your phone The pack contains: Base Handset Rechargeable battery Telephone line cord Power supply unit One set of operating instruction Installation prior to use 1. To open the battery compartment, press the battery cover of the handset and slide it down. 2.
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03 Handset LCD 1. Indicating information 2. New incoming call / incoming call indicator 3. Counts of incoming call numbers 4. Time 5. Talk time / Number display area 6. Date Functions of base 1. In Use / Charging indicator 2.
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03 Registering more than one handset to the base Base and handset of A16 or AM16A can support 1~4 handsets. Once the user registers them all, they will become operational. The user can also Page, INT and transfer calls between the base and the handsets.
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03 Telephone Set up The following settings are all conducted in the standby mode. Setting Time At the end of each message, the answering machine will automatically tell the time and date when the message is finished. Therefore, the user must set the current time and date of the answering machine when it is connected for the first time or re-connected with power supply.
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03 Press key or +/- key or digit keys (1, 2, 3, 4, 5) to select the ringer melody. Press Set up or Hold/Set up key to confirm. Setting Area Code (Local Code) Setting the area code (local code) respectively on the base and the handset: Press the Set up key on the base or Hold/Set up key on the handset to open the Menu.
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03 Note: If you want to cancel deregistration, simply press the End key to exit or long press the End key to go back to the Standby Status. “De-registering” means de-registration in process. After hearing the confirmation beep, you will see “Handset 1 de-registered”...
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03 two rings, the answering machine is activated, it means that there are messages. Otherwise, there are no messages. You may then hang up to avoid any unnecessary charges. Setting Auto Talk (Handset) Press the Hold/Set up key on the handset to open the Menu. Press +/- key to “Auto Talk”, then press the Hold/Set up key.
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03 Other settings Setting Remote Access Code The code is used to control the answering machine remotely via other phones. Press the Remote Code key for 3 seconds; you will see “Set Remote Code”. Press digit keys to enter a code of 3 digits. Press the Set up key to confirm.
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03 Basic Operation Answering a Call Press the Hands-Free key on the base, or press the Talk/Flash key on the handset, or pick up the handset from the base (only when set to the Auto Talk function). To end a call, press either the Hands-Free key on the base or the End key on the handset.
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03 number you want to redial. Press the Hands-free key on the base or the Talk/Flash key on the handset, and then the selected number will be dialed out automatically. Or press the Hands-free key on the base or the Talk/Flash key on the handset first, and then press the Redial key to dial out the selected number.
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03 Storing Incoming Call Numbers In Standby, press the Incoming call key on the base or handset, then press key on the base or + or – key on the handset to select the incoming call number you want to store from the incoming call list.
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03 Storing, Browsing and Deleting Caller-ID Storing Caller-ID The base or the handset can respectively store 10 numbers, each with up to 24 digits and 15 letters. In Standby, press the Store key on the base or the handset, then press key on the base or + or –...
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03 Browsing the Stored Numbers In Standby, press the Store key on the base or the handset, then press the location code of the number you want to search (0-9). In Standby, press the Store key, then press key on the base or + or –...
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03 Deleting VIP Setting In Standby, press the VIP key on the handset, and then you will see the VIP number on the display. Press the Redial/Clear key, and you will see “Delete?” on the display. Press the Redial/Clear key again to confirm deletion.
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03 Dialing SOS Number In Standby, press the SOS key on the handset then the Talk/Flash key to dial out the SOS number. Press the Talk/Flash key on the handset, and then press the SOS key to dial out the SOS number.
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03 the others will still be sounding. Or press again the Paging key on the base to stop paging all handsets. Note: If there is no answer, the paging will stop in 2 minutes. Internal talking (paging) The base paging the handset(s) In standby, press the INT key on the base, you will see “Paging Extension?”...
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03 From the base to a handset When you are talking to an external caller from the base, press the INT key, and you will see “Line on Hold Extension?” on the display. Then press the number of the handset you want to transfer to. The paged handset will ring, and you can press the INT key or the Talk/Flash key to talk to the base.
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03 Three-party conference This function is applicable for 2 registered handsets to talk to an external caller. When one handset answers the call, press the INT key, and you will see “Line on Hold Extension?” on the display. Then press the number of the other handset.
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03 Record message for family members Press down the Family Message/ Record key, when you hear beep and the answering machine is in Recording mode. Now, you can record your message for your family members. Release the key to end recording.
Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03 Remote Access This phone has remote access function. You can access it via other double-tone phones: Put through to the answering machine, After the Owner Message, enter remote access code, The menu will be audibly played as: The audio instructions for remote control Press 2 Play the incoming messages...
If the base receives any ineffective information, it will display error. No incoming call information You must apply for the Caller ID Service from your local phone service company. Hotline ccq_cp.com@siemens.com Hotline email Hotline service tel 4006 706 007 Website: www.siemens.com.cn/shc...