Preparing To Use Your Phone; The Pack Contains; Installing The Phone - Gigaset A16 User Manual

Gigaset A16, CS, A31008-G4010-C102-1-7619 W10-CSTOC 17.12.03

Preparing to use your phone

The pack contains:

Base
Handset
Rechargeable battery
Phone cord
Power supply unit
One set of operating instruction

Installing the phone

1. To open the battery compartment, press the battery cover of the handset and slide it down.
2. Insert the battery plug into the socket in the battery compartment and place the battery into the
battery compartment
3. Push up the battery cover
4. Place the handset with batteries into the base.
5. Insert the jack on the power supply unit into the socket on the back of the base, and then plug
the power supply unit into your power outlet. When the LED on the base lights up, the base is
powered.
Note: Please use the power adapter included in the package. Other power adapters might
damage your phone. For the first time, the batteries should be charged for at least 16 hours
before use.
6. Fit the small jack on the phone cord into the socket in the base and fit the other end into phone
outlet.
7. If "Ringer Off" is shown on the display, please set the ringer tone to "ON" according to the
descriptions in the "Ring switch" section.
Note: The dial mode of this phone has been set to tone dialing. If you want to change it to
pulse dialing, please refer to the descriptions in the "Tone/Pulse Switch" section. If you are
not sure which mode to apply, please consult your phone service company.
8. Place your base away from the "interference sources" (e.g.: TV, PC, microwave oven,
refrigerator, etc.) and in a central position of its range, and if you can place it at a higher
position, it will work better.
Note: Some communication devices using the 2.4GHz channel (such as cordless PC network,
etc.) might interference your new phone if not properly installed.
4