Table of Contents
Advertisement
DIGITAL IMAGE RECORDER
Here comes the description of each symbol.
SYSTEM LOG(Symbol)
SYS START
System On
SHUTDOWN
Normal System Off
LOGIN (A)
System Logged-in in SHR Admin Program
LOGOUT (A)
System Logged-out in SHR Admin Program
LOGIN (W)
System Logged-in in SHR Watch Program
LOGOUT (W)
System Logged-out in SHR Watch Program
LOGIN (S)
System Logged-in in SHR Search Program
LOGOUT (S)
System Logged-out in SHR Search Program
SETUP S (L)
Setup Menu On at Local
SETUP E (L)
Setup Menu Off at Local
SETUP S (R)
Setup Menu On in SHR
SETUP E (R)
Setup Menu Off in SHR
PB START
Playback Function On
PB END
Playback Function Off
REC START
REC Function On
REC END
REC Function Off
PANIC START
PANIC Function On
PANIC END
PANIC Function Off
TIME CHANGE
New System Time
LOAD DEFAULT
Initialized Setup Value
SYS UPGRADE
Upgraded System Program
DISK FULL
HDD Full
RECOVER PF
Automatic Rebooting after Abnormal System Off
VIDEO LOSS
Video Loss
BANK CLEAR
Erased HDD Data
BANK BAD
BAD Sector in HDD
NOT RESPOND
Poor Main Function due to System Trouble
CALL FAIL
Poor Network Connection
CB FAIL
Poor Callback Data Transmission
CLEAR ALL DATA (Clearing HDD)
If you set it to ON and terminate the menu, the following message will pop up.
Then click "YES" here to clear all data in the HDD.
[ON/OFF]
4-11
LOG Description
THIS OPERATION WILL
CLEAR ALL RECORDED DATA.
SYSTEM MUST RESTART TO
COMPLETE THE OPERATION
CONTINUE?
YES
NO
Caution
Caution
Be sure to check before you click CLEAR ALL DATA because the data will not be
retrieved once cleared.
DEFAULT SETUP (Resetting the initial status on factory delivery)
If you set it to ON and terminate the menu, all the setup values of the system will be
initialized as they were on factory delivery. But the HDD data will be left intact. [ON/OFF]
DO YOU WANT TO RELOAD
DEFAULT SETTINGS?
YES
NO
SYSTEM SHUTDOWN
Select SYSTEM SHUTDOWN and pull out the power cord in the back upon
appearance of the following message to terminate the system safely.
SYSTEM IS HALTED ...
Reference
Reference
DEFAULT SETUP can not initialize the following information.
- (1) CLOCK/DISPLAY MODE SETUP
LANGUAGE Information
- (2) SYSTEM SETUP
PASSWORD
- (3) SERIAL PORT SETUP
USAGE, BAUD RATE, PARITY, DATABIT, STOPBIT
- (4) NETWORK SETUP
IP ADDRESS, GATEWAY, NETMASK, ADMIN PASSWORD,
USER PASSWORD
Please press the FACTORY RESET button to return the SET to the factory delivery status.
4-12
Advertisement
Table of Contents
