Samsung SHR-4040P User Manual page 22

DIGITAL IMAGE RECORDER
1
Date, Time, & Screen Setup
Here comes the initial setup status of the CLOCK/DISPLAY MODE SETUP menu.
CLOCK/DISPLAY MODE SETUP
DATE
TIME
DATE DISPLAY TYPE
TIME DISPLAY TYPE
DATE/TIME DISPLAY
STATUS DISPLAY
LANGUAGE
œ❷
DATE
Sets up the current date.
TIME
Sets up the current time
If you change the date or time and press the MENU button to terminate setup, the
following message will pop up.
If you select YES, rebooting will start with the following message automatically.
System is adjusting recorded data to
new time.
Please, wait.....
4-1
2003-07-01
09:34:12
YYYY-MM-DD
24 HOURS
ON
ON
ENGLISH
:MOVE :SELECT MENU:EXIT
System must restart to
change system time.
Continue?
YES NO
System will restart automatically,
Please wait..
Caution
Caution
If the new date or time corresponds with the preset data recording time, the follow-
ing data will pop up to warn the original data will be erased.
CHANGING TIME INTO THE PAST CAUSES
DELETION OF THE ORIGINAL DATA CORRE-
SPONDING TO OVERLAPPING TIME!
PROCEED?
YES NO
If you select YES, system rebooting will start.
Be sure to set the date and time to the real time.
DATE DISPLAY TYPE
There are 3 types of date display. You may choose one at your convenience.
[YYYY-MM-DD/DD-MM-YYYY/MM-DD-YYYY]
TIME DISPLAY TYPE
There are 2 types of time display.
[24 HOURS/12HOURS(am/pm)]
DATE/TIME DISPLAY
If you want to display the date and time in the screen, set it to ON and if not, set it
to OFF. [ON/OFF]
STATUS DISPLAY
If you want to display the system conditions, for example, replay information during
recording or replay, set it to ON and if not, set it to OFF. [ON/OFF]
LANGUAGE
Select a language as you like. Either English or Chinese is available now.
[ENGLISH/CHINESE]
4-2