Connecting To External Device 2-2 2. Connecting To Pc - Samsung SHR-4040P User Manual

DIGITAL IMAGE RECORDER
1
Connecting External Device
VIDEO IN-THROUGH AUDIO IN
1 2 3 4
1 2
3 4
This device can be connected to such external device as an video signal input
camera, audio signal input microphone, and video/audio signal output monitor.
It can be also connected to such external device as an alarm at user's request.
It can be connected to a PC through serial communication or LAN.
Caution Caution
This device shall be combined with a monitor that is able to support the PAL video
signal. A general computer monitors is not applicable.
2-1
AV OUT
VIDEO S-VHS
AUDIO
FACTORY
NETWORK RS-232C RESET
2
Connecting PC
You can control the system remotely through RS-232 parallel communication or Lan
by a PC.
(1) Connecting RS-232C
A. Communication Method
- Data Code : ASCII Code
- Protocol : 8 bit Data, 1 Stop bit, None Parity
- Transmission Speed : 4800, 9600, 19200, 38400, 57600 bps
B. RS-232C Port(D-SUB 9 Pin) and Pin Specification
Pin No.
1
2
3
4
5
6
7
8
9
(2) Connecting LAN
You are able to monitor, search, and save video data with the Remote
Program(RAS).
Please refer to xx page about how to use RAS.
5 1
9 6
Pin Specification
CD (CARRIER DETECT)
RXD(RECEIVED DATA)
TXD(TRANSMITTED DATA)
DTR(DATA TERMINAL READY)
SG(SIGNAL GROUND)
DSR(DATA SET READY)
RTS(REQUEST TO SEND)
CTS(CLEAR TO SEND)
RI(RING INDICATOR)
2-2