Samsung SHR-4040P User Manual page 58

SHR SMART VIEWER
❿¤
Emergency Event Log
Displays the log information of emergency events called back from remote sites. If
the user sets the period of interest and clicks the Find button, the emergency event
log entries within the period are displayed in the list.
From : If this box is checked, search from the first emergency event log. If you
want to a specific starting date/time, remove a check and then set the desired
date/time
To : If this box is checked, search until the last emergency event log. If you want
to a specific ending date/time, remove a check and then set the desired date/time.
Find : Displays emergency event log entries within preset period.
Save : Saves the log information to the text file.
Print : Prints the log information out.
Close : Closes the Log dialog box.
11-11
Function Buttons
❿¤
Connect Button
Select the site you want to connect to from the Remote Site List, and then click the
Connect button to initiate connection (if required) and to display the system status
of the connected system. If you want to connect to another site, disconnect from
the currently connected system by releasing the Connect button by clicking on it.
NOTE NOTE
Up to 16 remote DVRs can be connected to the SHR Smart Viewer, and up to two
users can access the remote DVR at the same time.
❿¤
Watch/Search Button /
Initiates the SHR Watch or the SHR Search programs. Select the site from the
Remote Site list, and then click the Watch or the Search button to activate the SHR
Watch or the SHR Search. The site you select will be connected directly.
NOTE NOTE
Clicking a Watch or Search button when no site is selected in the Remote Site List
only activates the program without connecting to a site.
❿¤
Setup Button
Allows changing the programming of the remote DVR.
NOTE NOTE
Refer to the manual for each applicable remote DVR for the details of system pro-
gramming and setup.
NOTE NOTE
The Motion-Detecting Zone Setup dialog box of the remote DVR setup is as follows.
11-12