Table of Contents
Advertisement
DIGITAL IMAGE RECORDER
1
System Booting
Power On
This system has no power switch.
When you connect the adapter with the power cable, the LED and buttons in front
of the system are all turned on and the system starts booting as the following
screen pops up.
Upon completion of booting, the following live screen pops up.
CAM 1
CAM 3
Failure of normal booting will carry on the following message.
The following message will be displayed when power is on without HDD installed.
THERE ARE NO INSTALLED HDDS
PRESS OK BUTTON TO SHUTDOWN.
3-1
NOW PREPARING HDDS...
2002-07-01 08:00:00
CAM 2
CAM 4
OK
CANCEL
The following message will be displayed if you miss to install the Master HDD.
THERE ARE NO INSTALLED
MASTER HDD.
PRESS OK BUTTON TO SHUTDOWN.
OK
CANCEL
The following message will be displayed if the Master HDD is not partitioned.
THE MASTER HDD MUST BE
PARTITIONED.
IF YOU PRESS YES THE
SYSTEM WILL PARTITION
THE MASTER HDD.
YES
NO
If you select "YES", partitioning will begin with the following message.
WAIT WHILE THE MASTER HDD IS
BEING PARTITIONED...
Upon completion of Master HDD partitioning, the following message will be dis-
played to confirm rebooting.
SYSTEM MUST RESTART BEFORE THE
CHANGES TAKE EFFECT.
WOULD YOU LIKE TO REBOOT NOW?
YES
NO
3-2
Advertisement
Table of Contents
