Table of Contents
Advertisement
4.8.99
Intermezzo function (pause during message playback)
B
Time stamp function
B
Time and day of week
KAP04.FM4
42
Code for not listening to messages.
B
Store the settings.
You can specify how the answering machine plays back
messages. With the default setting, the answering
machine outputs several messages one after the other
without pauses. You can set the system so that between
each message there is an announcement requesting you
to play back the next message. The next message is not
played back until key key
you time to decide whether or not you wish to delete a
message, for example.
#I9
Start the function.
51
Code for pause between messages.
or
52
Code for no pause between messages
(default setting).
B
Store the settings.
You can specify whether recorded messages are to
include the day and time when the message was
received.
#I9
Start the function.
81
Code for activating the time stamp function (default
setting).
or
82
Code for deactivating the time stamp function.
B
Store the settings.
If the time stamp function is activated, the current time
and day of the week must be programmed in the answer-
ing machine. They also have to be reprogrammed follow-
ing a power failure or if the device has been reconnected.
You are prompted through the setting procedure by way
of the base station's loudspeaker.
Gigaset 2015, GBR: A30852-X-1105-B301-1-7619
Important basic settings
W
has been pressed. This gives
17
Advertisement
Table of Contents
