Example 2: Several Base Stations Connected To A Corded Telecommunications System - Gigaset 2015 Operating Instructions Manual

4.8.99
Operation with several base stations

Example 2: Several base stations connected to a corded telecommunications system

L1
Tel. sys.
L2
L1, L2 =Telephone circuits
BS = Base station
MU = Mobile unit
Tel. sys. = Telecommunications
system
64
kap13.fm4
The following example shows a configuration in which
three base stations are connected to a small corded
telecommunications system (in this case a telecommuni-
cations system for two telephone circuits and eight
station lines). Each of the six mobile units is logged
on at all three base stations.
Each mobile unit can be used to make calls in the radio
range of all three base stations via both lines (L1 and L2).
Each can also be accessed for incoming calls, irrespective
of the radio range to which it belongs.
MU2
MU1
BS1
BS3
MU6 MU5
With this configuration you can also operate up to 6
mobile units per base station.
Gigaset 2015, GBR: A30852-X-1105-B301-1-7619
MU3
BS2
MU4