Example 3: Several Base Stations Connected To Several Telephone Circuits - Gigaset 2015 Operating Instructions Manual

4.8.99

Example 3: Several base stations connected to several telephone circuits

L1
L2
L1, L2 : Telephone circuits
BS : Base station
MU : Mobile unit
kap13.fm4
Operation with several base stations
The following example shows a configuration in which
two base stations are connected to two separate tele-
phone circuits. Each of the three mobile units is logged
on at both base stations. (The base stations are connect-
ed to telephone circuits with different numbers.)
Each mobile unit can be used to make calls in the radio
range of both base stations. The telephone circuit to
which the base station is connected is seized automati-
cally. Each mobile unit can also be accessed for incoming
calls, irrespective of the radio range to which they belong.
With this configuration you can also operate up to 6
mobile units per base station.
Gigaset 2015, GBR: A30852-X-1105-B301-1-7619
MU1
MU2
BS1
BS2
MU3
65