Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-3-6Z19 3000cou.fm Brief overview The display is protected by a film. Please remove protective film. Base name – Constant: ready for dialling/to receive – Flashing: no base station contact End call – End call – Cancel function –...
Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-3-6Z19 3000cou.fm Important menus Main menu Settings Audio Activate the main menu Scroll through menus, directory Confirm function/ input Activate supple- mentary menu Cancel/end func- tions 05.01.00 Directory Supplementary menu Redialling number Supplementary menu...
Operate battery type in accordance with these operating instructions. • Never use non-Siemens charging units as these can dam- age the batteries. • Batteries heat up during charging - this is a normal occur- rence and is not dangerous.
Insert rechargeable batteries correctly in accordance with polarity symbols. Operate battery type in accordance with these operating instructions. • Never use non-Siemens charging units as these can damage the batteries. • Please dispose of old, defective batteries in an environmentally-friendly manner.
Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-3-6Z19 3000co.fm Charging the batteries The batteries supplied are not charged. To charge the bat- teries, insert the handset either into the base station or the Gigaset 3000L charging unit – you will hear the confirmation beep.
Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-3-6Z19 3000co.fm Handset operating time/charging time: Capacity Standby time Talktime (mAh) (hours) (hours) up to 100 approx. 10 1100 up to 160 approx. 15 1500 up to 220 approx. 20 Fitting the attachment clip Push the clip onto the back of the handset until the protru- sions slot into place.
You must register a new handset at the base station before you can make any telephone calls. When you switch on your handset, the message Step 1: • You must first prepare the Siemens base station: Gigaset Preparing the base station 3010/pocket...
Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-3-6Z19 3000co.fm Making calls Making external calls Enter the call number. If necessary, correct with Press the talk key to start dialling. Ending a call: Press the end call key – You can cancel the dial operation with the end call key –...
Press the handsfree talking key instead of the talk key Transferring a call, making an enquiry call Siemens base stations allow you to transfer an external call to another handset or to hold a call while making an internal enquiry call.
Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-3-6Z19 3000co.fm Redial Manual redial You can access the last five call numbers dialled. Display and select the call number. Start the dial operation. Automatic redial This function is not available in all countries! The handset redials the last call number.
Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-3-6Z19 3000co.fm Directories With the directory , you can store up to 100 call num- bers and then dial them at the push of a button. You can store prefixes for telephone companies and fre- quently used call numbers in the network access list (see also Network access support, page 16).
Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-3-6Z19 3000co.fm Entering names To enter names, you can choose letters, digits and symbols with the appropriate key: Press the appropriate key repeatedly or hold it down: ä ë ï ö ü – £ Blank Upper/lowercase:...
Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-3-6Z19 3000co.fm Additional functions Display the directory/network access list. e.g. Enter the first letter of the name, e.g. press for " Open the supplementary menu. Select the required function and con- firm: (add to/change a call number before dialling);...
Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-3-6Z19 3000co.fm Network access support • Linking call numbers This function allows you to merge two parts of a number. Open the network access list and select an entry. Open the supplementary menu. Confirm displayed. e.g.
Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-3-6Z19 3000co.fm Caller list Unanswered calls are also, for example, stored in the caller list New entries in the caller list are indicated by the display symbol Press the display key – the caller list, for example, is displayed.
Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-3-6Z19 3000co.fm Ringer volume/melody – You can choose between 5 ringer volumes, the crescendo ring (increasing volume) and ringer off (=0). – You can choose between 10 ringer melodies. Press the menu key. Select Select Select Change the setting and save.
Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-3-6Z19 3000co.fm Security You can change the telephone PIN, set up direct station selection or lock your telephone (handset). The security functions begin as follows: Press the menu key. Select Select Enter the telephone PIN (factory setting: Tel.
Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-3-6Z19 3000co.fm Hot key selection (direct station selection) This function is not available in all countries! When hot key selection is activated, every keystroke ini- tiates a call to the previously stored hot key number. Sick people and the elderly, for example, can thus summon help in emergencies.
Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-3-6Z19 3000co.fm Dialling the emergency number When the hot key/telephone lock is activated, you can dial the emergency numbers saved on the base station – see base station operating instructions! Further settings Auto talk If this function is activated, simply remove the handset from the base station/charging unit to answer a call.
Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-3-6Z19 3000co.fm Resetting the handset to the default configu- ration The telephone PIN is not reset, the directory, network access list and the caller list are not deleted. Handset factory settings: Language setting Hot key, redial...
Base settings Registering the handset You can operate your handset at up to 4 base stations. For information on registering at non-Siemens GAP base stations, see the relevant base station operating instruc- tions. • To prepare the base station, see page 9.
– automatic switch to the base station with the strongest reception. Select Only possible in conjuction with some Siemens ISDN base stations. Refer to the appropriate operating instructions. User options (short cuts) Base station user options Only available with Gigaset 3000 base stations! Refer to the appropriate operating instructions.
Page 25
Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-3-6Z19 3000co.fm Additional supplementary menu functions when enter- ing the short cut contents: The following letters are displayed for the functions: Select a function and confirm. The meaning of the character at the current cursor position is displayed.
Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-3-6Z19 3000co.fm Room monitor When the room monitor feature is activated, an internal call to another handset is triggered as soon as the noise level in the monitored room reaches the level set. You can hear the noises in the room when you answer the call.
Low reception strength Guarantee/service Over a guarantee period of six months from the date of pur- chase from the stockist, Siemens AG will rectify all material or manufacturing defects by repairing or replacing the defec- tive terminal. The guarantee does not cover damage caused by incorrect use, wear and tear, or third-party access.