Pci / Plug And Play Setup Page - MATSONIC MS7308E User Manual

MS7308D/E Mainboard User's Manual

PCI / Plug and Play Setup Page

This page sets some of the parameters for devices installed on the
PCI bus and devices that use the system plug and play capability.
Plug and Play
Enable this item if you are using an O/S that
Aware O/S
supports Plug and Play such as Windows 95 or
98.
Primary Graphics
This item indicates if the primary graphics
Adapter
adapter uses the PCI or the AGP bus. The
default PCI setting still lets the onboard display
work and allows the use of a second display
card installed in a PCI slot.
Allocate IRQ to
If this item is enabled, an IRQ will be assigned
PCI VGA
to the PCI VGA graphics system. You set this
value to No to free up an IRQ.
Reserved Memory
This item lets you reserve a block of memory
Size
for any device that requires it.
Reserved Memory
This item lets you set the address for any block
Address
of memory that has been reserved.
26