Setting The Test Tone - Samsung HW-C500 User Manual

Setup

SETTING THE TEST TONE

Use the test tone to check the speaker connection status or level.
1. Press the SETUP/MENU button.
•
Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
2. Press the ENTER button to select SETUP ENTER.
3. Press the ▲▼ buttons to select TEST TONE, and then press the ENTER
or ► button.
4. Press the ▲▼ buttons to select the option you want, and then press the
ENTER or ► button.
•
AUTO : Test signal will be automatically output as follows; F.L
S.W F.R S.R
- During test tone output, press the ▲▼ buttons to adjust the speaker
output level from -10 to +10 dB by 1 step.
•
MANUAL : Enables you to adjust the output level of the speaker
manually.
1) Press the ENTER button to select the speaker you want.
Each time you press the ENTER button, F.L
S.R S.L will be selected in turn.
2) Press the ▲▼ buttons to set the Test Tone mode you want.
You can adjust the speaker output level from -10 to +10dB by 1 step.
The sound gets quieter at -10dB and louder at +10dB.
- Test Tone Output -
• F.L (front left) : -10 ~ +10dB
• CEN (center) : -10 ~ +10dB
• S.W (subwoofer) : -10 ~ +10dB
- To stop test tone -
•
Press the SETUP/MENU button once.
SETUP OFF appears on the display and test tone stops.
36
S.L.
CEN
• F.R (front right) : -10 ~ +10dB
• S.R (surround right) : -10 ~ +10dB
• S.L (surround left) : -10 ~ +10dB
CEN
S.W F.R