AS700GB
11/24/04 10:53 AM
Test Tone
Use test tine to check speaker connection status or defect of speaker or adjust the level.
Page 22
To Automatically Output Test Tone
REMOTE CONTROL
1
Press TEST TONE button.
Test signal will be automatically output as follows; F.L
•
S.B
During test tone output, press ...† button to adjust the speaker output level
•
from -10 to +10 dB by 1 step.
To Stop Test Tone
Press TEST TONE button again.
•
√
S.L
S.W.
Caution!
You cannot use test tone in 5.1CH MULTI CH function.
•
CEN
F.R
S.R
22