Setting The Test Tone; Setting The Drc (Dynamic Range Compression) - Samsung SWA-4000 Service Manual

Setting the Test Tone

Use the Test Tone feature to check the speaker connections.
In Stop or no
1 3
disc mode,
press MENU
button.
The test tone will be sent to L ➝ C ➝
•
R ➝ SR ➝ SL ➝ SW in order.
If the ENTER button is pressed again
at this time, the test tone will stop.
Press Cursor
2
button to move to
'Audio' and then
press ENTER button.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Alternate method: press the TEST TONE button on the remote.
Press TEST TONE button.
•
Test tone will be produced as follows:
When playing a DVD or CD, this will work
only in Stop mode.
•
Use this function to check that each speaker is
correctly connected and that there is no problem.
To end the test tone,
55
press TEST TONE button again.
Press Cursor button
to move to 'TEST
TONE' and then press
ENTER button.
L: Front Speaker (L) C: Center Speaker
R: Front Speaker (R) LS: Rear Speaker (L)
Multi-Channel Pro Logic Mode
Start
Setting the DRC
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
1
In Stop or no disc mode,
press MENU button.
3 Press Cursor
move to 'DRC' and then
press ENTER button.
SW: Subwoofer
RS: Rear Speaker (R)
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
(Dynamic Range Compression)
2
Press Cursor
move to 'Audio' and then
press ENTER button.
button to 4
Press Cursor
adjust the 'DRC'.
•
When the Cursor button is pressed, the effect is greater,
and when the Cursor
smaller.
ENG
button to
, to
button is pressed, the effect is
56