Test tone
Use the test tone check the speaker connection status or level.
28
To automatically output test tone
1
Press SETUP/MENU button, and then press the ENTER
button.
"SETUP MODE" appears on the display and the unit goes into Setup Mode.
•
2
Press
button to select the "TEST-T AUTO",
and then press the ENTER button.
Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝
•
S.R ➝ SBR ➝ SBL ➝ S.L ➝ S.W .
During test signal output, press ...† button to adjust the individual speaker
•
output level from -10 to +10 dB by 1 step.
To stop test tone
Press SETUP/MENU button once time.
•
"SETUP OFF" appears on the display and test tone stops.
Using the Test Tone button
Press TEST TONE button.
Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝ S.R ➝
•
SBR ➝ SBL ➝ S.L ➝ S.W.
During test tone output, press ...† button to adjust the speaker output level from
•
-10 to +10 dB by 1 step.
√