Test Tone - Samsung HT-AS700 Instruction Manual

Test Tone

Use test tine to check speaker connection status or defect of speaker or adjust the level.
To Automatically Output Test Tone
REMOTE CONTROL
1
Press TEST TONE button.
Test signal will be automatically output as follows; F.L
•
S.B S.L S.W.
During test tone output, press ...† button to adjust the speaker output level
•
from -10 to +10 dB by 1 step.
To Stop Test Tone
Press TEST TONE button again.
•
Caution!
You cannot use test tone in 5.1CH MULTI CH function.
•
√
CEN F.R S.R
22