Registering A Unit - Panasonic KX-TG6611E Operating Instructions Manual

TG6611-6621E(e).book Page 28 Tuesday, December 7, 2010 2:00 PM
Programming
logged in the caller list (page 30) with 7
after the call is disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the
call barred list.
Important:
L You must store the phone number with an
area code in the call barred list.
■ From the caller list:
1
{<} (y)
2
{r}: Select the entry to be barred. s
I
3
{r}: "Caller Barred" s M
4
{r}: "Yes" s M s {ic}
■ By entering phone numbers:
1
8(217 s m
2
Enter the phone number (24 digits
max.). s M
L To erase a digit, press ^.
3
{ic}
Viewing/editing/erasing bar call
numbers
1
8(217
2
{r}: Select the desired entry.
L To exit, press {ic}.
3
To edit a number:
~ s Edit the phone number. s M
s {ic}
To erase a number:
W s {r}: "Yes" s M s {ic}
Note:
L When editing, press the desired dial key to
add, ^ to erase.
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
8(256
28
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
2
Enter the base unit PIN (default: "0000").
L If you forget your PIN, see page 42.
3
{r}: Select the handsets to be restricted.
s t
L All handsets registered to the base unit
are displayed.
L "Q" is displayed next to the selected
handset numbers.
L To cancel a selected handset, press
t again. "Q" disappears.
4
M
5
{r}: Select a memory location. s M
6
Enter the phone number or area code to
be restricted (8 digits max.). s M s
{ic}
L To erase a restricted number, press
^.
Note:
L You can also select a memory location in
step 5 as follows:
Press 1 to 6. s M
Changing the base unit PIN
(Personal Identification Number)
Important:
L If you change the PIN, please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, see page
42.
1
8(132
2
Enter the current 4-digit base unit PIN
(default: "0000").
3
Enter the new 4-digit base unit PIN. s
M s {ic}

Registering a unit

Operating additional units
Additional handsets
Up to 6 handsets can be registered to the base
unit.