TG6611-6621E(e).book Page 16 Tuesday, December 7, 2010 2:00 PM
Getting Started
Icon
Action
Inserts a dialling pause.
l
Erases the selected item or
W
returns to the outside call.
Allows you to make an intercom
4
call. (page 38)
Erases a number/character.
^
Puts the call on mute.
1
*1 KX-TG6621/KX-TG6622/KX-TG6623/
KX-TG6624
Turning the power on/off
Power on
Press {ic} for about 1 second.
Power off
Press {ic} for about 2 seconds.
Initial settings
■ Direct command code:
Programmable settings can be accessed
by pressing 8, ( and then the
corresponding code on the dial keypad
(page 23).
Example: Press 8(1)1.
■ Symbol meaning:
Example: {r}: "Off"
Press {V} or {^} to select the words in
quotations.
Display language
1
8(11)
2
{r}: Select your desired language. s
M
3
{ic}
16
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Date and time
Important:
L When you install the batteries for the first
time, the handset may prompt you to set
date and time. First press M, then
proceed to step 2.
1
8(1)1
2
Enter the current date, month, and year.
s M
Example: 15 July, 2011
15 )7 11
3
Enter the current hour and minute.
Example: 9:30
)9 3)
L You can select 24-hour or 12-hour
clock format ("AM" or "PM") by
pressing /.
4
M s {ic}
Note:
L The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
One touch eco mode
The {ECO/R} button on the handset enables
you to activate the eco function with one touch.
By activating eco mode, your unit can reduce
the base unit transmission power by up to 90%
in standby mode.
You can turn on/off one touch eco mode by just
pressing {ECO/R}. The default setting is
"Normal".
– When the one touch eco mode is on: "Low"
is temporarily displayed and i is shown
on the handset display instead of w.
– When the one touch eco mode is off:
"Normal" is temporarily displayed and
i goes off from the handset display.
Note:
L When there is another cordless phone
nearby and it is in use, the base unit
transmission power may not be reduced.
L Activating one touch eco mode reduces the
range of the base unit in standby mode.