To Guard Against Electromagnetic Interference; Before Installing And Fixing; Before Using The Adhesive Tape - Pioneer AVIC-9DVD II Installation Manual

Hide thumbs Also See for AVIC-9DVD II:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Installation

To guard against electromagnetic interference

• In order to prevent interference, set the following items as far as possible from the main
unit of this Navigation System, other cables or leads:
- TV aerial and aerial lead
- FM, MW/LW aerial and its lead
- GPS aerial and its lead
In addition you should lay each aerial lead as far as possible from other aerial leads.
Do not bind them together, lay them together, or cross them.
Such electromagnetic noise would increase the error for the location display.

Before installing and fixing

• Consult with your nearest dealer if installation requires the drilling of holes or other mod-
ifications of the vehicle.
• Before finally installing the unit, connect the wiring temporarily, making sure it is all
connected up properly, and the unit and the system work properly.

Before using the adhesive tape

• Make sure the surface is free of moisture, dust, grime, oil, etc. before affixing the tape.
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avic-8dvd ii

Table of Contents