Hans Grohe Raindance Connect Showerpipe 27164001 Installation Instructions / Warranty page 7

Tighten the shower arm safety screw with a 2 mm
Allen wrench.
Place a hose washer in one end of the hose. Connect
this end to the water supply (not included).
This unit does not include a water
supply. Use Hansgrohe model
27458XX3 or another supply that
complies with ASME A112.18.1/
CSA B215.1 including ASME
A112.18.3.
Place the screen washer in the other end of the hose.
Connect this end to the handshower.
Adjust the slider
To make the slider easier to move up and down the bar,
turn the screw counter-clockwise.
To make it harder to move, turn the screw clockwise.
harder
easier
7